What EV Charger Do You Need for a 2022 Porsche Taycan Turbo?
Wiring a 60 ampere breaker for your 2022 Porsche Taycan Turbo demands a licensed professional. You need a 48 amp Level 2 setup to match the vehicle onboard charger. An electrician must pull heavy gauge wire and hardwire the unit directly to your electrical panel.
The numbers
| Maximum AC charging rate | 11.0 kW (48 A) |
|---|---|
| Charger size to buy | 48 A |
| Circuit breaker required | 60 A |
| Outlet / connection | hardwired (a 48 A EVSE must be hardwired -- no household receptacle is rated for it) |
| Charge port | J1772 |
| Full charge on Level 2 | about 8.9 hours |
| Range added per hour (Level 2) | about 24 miles |
| Full charge on a 120 V outlet | about 68 hours |
| Range added per hour (120 V) | about 3.1 miles |
| EPA rated range | 212 miles |
| Energy for a full charge | about 97.5 kWh at the wall |
Why 48 amps and not more
The car accepts a maximum of 48 amps of alternating current. Pumping more juice into the vehicle is useless because the onboard charger caps the intake at 11.0 kilowatts. A smaller 32 amp or 40 amp unit will still charge your battery, but it takes longer to reach full capacity. Sticking with 48 amps hits the hardware limit and replenishes your 97.5 kilowatt hour battery in 8.9 hours. Buying a larger 50 amp charger will not speed things up either.
What the install involves
Code requires hardwiring for this amperage level because no standard household receptacle handles 48 continuous amps safely. An electrician has to check your service panel for spare capacity before running the THHN copper wires through conduit. They land the wires on a dedicated 60 amp two pole breaker. Mount the hardware to a stud near where you park, and plug the J1772 connector straight into the car port.
Chargers that match this car
Energy monitoring built in. Hardwire it for the full 48 A.
Compact unit, good for tight garages.
Adjustable from 16 A to 50 A in the app, which helps if your panel is tight.
Worth having as well
Common questions
- Can I use a standard wall outlet?
- No. Drawing 48 amps requires a hardwired connection because standard wall plugs melt under that kind of continuous electrical load.
- What connector does this car use?
- The vehicle uses a standard J1772 connector for all Level 2 home charging. Every non Tesla electric vehicle sold in North America through 2024 uses this same plug format.
- How long does a full charge take?
- Plugging into a Level 2 charger at the maximum 48 amp rate takes 8.9 hours to fill the battery from empty. The EPA test estimates 10.5 hours because that specific testing protocol does not run at the vehicle peak alternating current rate for the entire duration.
- What happens if I plug into a standard household socket?
- Level 1 charging from a standard household outlet takes 68 hours for a complete fill. You gain about 3.1 miles of range per hour, which makes daily driving recovery nearly impossible.
Other vehicles
Charging times derived from EPA data for the 2022 Porsche Taycan Turbo. Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.